EQUIPMENT'S

Xtreme controls restorations is a company that focuses on helping customers using the latest equipment & machinery



Large Low Grain Commercial Dehhumidifier

Key Features

Z

Weight: 20.5 Kg

Z

Max Water Removal Per 24 Hr: 19 Litres Per 24 Hours

Z

Lowers Humidity Levels To: 40% Rh

Z

Air Movement Per Hour: 158m3/Hour

Z

Power Consumption: 0.36kw/Hour

Z

Supply Voltage: 110v

Technicians Review

Very Good Compact Dehumidifier, Does A Good Job Controlling Humidity and Small Leaks. Useful for Smaller Drying Jobs.

Typical Applications

Z

Drying Small Areas

Z

Caravans

Z

Boats

Z

Cars

Combine the Compact Domestic Dehumidifier with Air Movers for the Best Result. This Will Help with Evaporation and Make for Successful Drying.

Humidity Control

Z

Domestic Condensation Control – Humidity Control of Small Areas

The XPOWER X-8

is the only 8 inch. diameter industrial confined space ventilator fan with a variable speed control switch in the air mover market. Featuring a low amp draw and performance plus induction motor, the X-8 delivers dry air for ventilation, drying or exhaust fan jobs. This unit can be used without hoses to create negative air pressure and air circulation in gyms, hallways and other large areas.
Ventilate any narrow space including subterranean manholes and sewers up to 125 ft. with the optional 8 inch. diameter ducting hose (8DH25). Lightweight and easily transportable, this unit weighs only 13.4 lbs. and features a durable ABS injection molded housing. Ducting hose transportation and set up is a breeze with the optional handled ABS ducting hose carrier (8DHC).

The XPOWER X-600A

is our most powerful air mover that speeds up the drying process for water damage restoration and janitorial cleaning applications. With the ability to blast up to 2400 CFM, this 1/3 HP unit will get the job done quickly and efficiently.
With its low power draw and on-board GFCI power outlets that is daisy-chainable, you can connect and power up to three units on a single 15-ampere circuit.
The three-speed control switch and four different positioning angles give you the power to adjust the airflow speed and direction, depending on if you’re drying walls, ceilings, floors, carpets, tiles or entire rooms.

The air scrubber mighty

the new XPOWER X-2480A achieves professional grade air purification in a super portable compact footprint. Featuring a powerful 1/2 HP external rotor induction motor, this 3-stage commercial purification system produces 550 CFM with less than a 3.0 amp draw.
Developed to restore indoor air quality at a variety of job sites—the X-2480A with HEPA filter effectively removes contaminants such as bacteria, allergens, mold and sub-micron sized dust with its advanced 3-stage filtration technology.

Z

Stage 1 – Nylon Mesh Filter is washable and will help to extend the life of the primary filters.

Z

Stage 2 – Pleated Media Filter will assist in removing additional impurities.

Z

Stage 3 – True HEPA Filter will capture contaminants as small as 0.3 microns at an effective 99.97% rate.

This machine is our main equipment to achieve air purification in mold jobs- Our clients get to enjoy their homes while remediation is in process.

The E1200

is our CSA/US approved dual purpose portable extractor engineered for hard surface and carpet cleaning. This 10 gallon extractor comes with auto fill and auto drain, front mounted pressure adjuster and pressure gauge for user convenience. The external filter protects the internal pump out by catching debris before it goes into the recovery tank.

Esteam Ninja Classic 500 psi

Portable Carpet Cleaning Extractor- Our Monster carpet cleaning machine.

The Protimeter MMS2

As a restoration professional I cant do the job properly without The Protimeter MMS2 is the industry’s most advanced all-in-one moisture meter. Its ergonomic, 4-in-1 design allows one-handed operation to measure moisture on and below the surface as well as ambient air humidity. With an infrared thermometer to calculate the difference between dew point and surface temperature, this meter is designed to assess moisture in both new and refurbishing projects, as well as to diagnose moisture-related problems.